The Best Of Tracey Adams

Faux Washi Tape

Hello!


Finally, I'm back with my washi false step, as promised.
As Promised, here is (finally!) my washi slap technique.


I remind you what I did with / A Reminder of What I Did With mine :

To begin you will need / You Will Need:

• Teflon pad (I use the large carpet My Tattered Angels) / CRAFT sheet (i used the big pink sheet from My Tattered Angels)
• Tissue Paper / Tissue Paper
• Mod Podge Glue Paper / Mod Podge glue paper
• Brush Foam / Foam brush
• Stamps pattern repetitive / Stamps With repetitive designs
• Solvent ink (Staz-On) in different colors / Solvent Ink (Staz On) in Varioius colors
• Knife Rotary / Rotary Cutter
• Rule of metal-backed cork / Cork-backed metal ruler

1. Place sheet of tissue paper (I used pink pale) and spray Glimmer Mist (I used the colors Indian Corn Call Caramel Delight and Peach). Let dry. / The Place On The craft tissue paper sheet and spray With Glimmer Mists (I Used Indian Corn, Caramel and Peach Delight Call). Let dry.
2. Once dry ( about 15 minutes), coat of Mod Podge using the foam brush. Be careful not to weigh too much, to avoid tearing the paper. Beyond the edges to coat, then you can remove the excess when it's dry. / Once dry (about 15 min.) Cover Mod Podge With Using The foam brush. Be Careful not to press too hard On The brush gold you'll Tear the paper. It's OK to go Over the Edge, Can Be The excess removed aftr it's dry.
3. Once everything is thoroughly dry (may take a few hours, but the Mod Podge will dry slightly sticky even) print patterns to stamp on any surface. I used polymer stamps from Hot Off The Press (Bold Patterns and Delicate Patterns: HOTP HOTP-1010 and 1014). Mod Podge has made the surface less porous, so it is wise to use ink Staz On. CAUTION : Never use cleaners Staz-On on a polymer stamp. Just clean with a damp cloth immediately after use and it will remain not stained. / Once dry (may take a few "hours, But The Mod Podge Will Remain Slightly sticky), stamp all over-the paper (I Used Hot Off The Press' Delicate Patterns and Bold Patterns: HOTP HOTP-1010 and 1014) . The Glue Will Make the tissue paper glossy, So You Will Need to use solvent-based ink (Staz-On). SECURITY: Never Used Staz-On is clearn polymer stamps. Just Clean It With A damp rag after stamping and It Will not stain).
4. Peel off the sheet of Teflon mat, place on a cutting mat and cut into strips of desired width using a rotary cutter and a good rule to cork backing. / Remove The Paper From The craft sheet and place it on a cutting mat. Using The rotary cutter and metal ruler, cut in strips of In The width your choice.

NOTE: I chose to prepare a large quantity, but one can easily reduce the scale. Try a 12 "long, so you can use your fake washi tape as a border on a scrapbook page.

NOTE: I prepared a big sheet, you aim Cdn Always Reduce the scale. Try 12 "in length for your scrapbook pages are borders.

I've also prepared a downloadable plug here.

I aussi Prepared for you a downloadable version here .